QIDI · China
Plus5
$749 Combo with QIDI Box: $899
A bigger, hotter Plus4: 320 mm cube-ish build volume, 65 °C heated chamber and a 370 °C nozzle for $749 — the value pick for engineering filaments.
- Build volume
- 320 × 320 × 300 mm
- Max speed
- 600 mm/s
- Enclosure
- Heated chamber
- Multi-color
- Add-on
- Camera
- Built-in
- LAN & privacy
- Local-first
About the Plus5
The Plus5 replaces the Plus4 with an 18% larger build plate, a 370 °C hotend and an actively heated 65 °C chamber — the recipe for warp-free ABS, ASA, nylon and polycarbonate parts at a price well under Bambu's and Prusa's enclosed machines. It's a Klipper-based CoreXY with Ethernet as well as Wi-Fi, a 1080p camera with failure detection, load-cell leveling and HEPA plus carbon filtration.
Multi-color comes from the optional QIDI Box (4 spools each, up to four boxes), which also dries filament. Early reviews flagged the Box's firmware as unfinished, so buy it for single-material engineering work first and treat multi-color as a bonus.
Pros & cons
What's good
- 370 °C nozzle and 65 °C heated chamber at a mid-range price
- Larger 320 × 320 × 300 mm build volume
- Klipper-based, works with QIDI Studio, OrcaSlicer and PrusaSlicer
- Ethernet and Wi-Fi; 1080p camera with AI failure detection
- HEPA + carbon filtration
What to watch
- QIDI Box multi-color was unreliable in early reviews
- Filament loads from the back — awkward in tight spaces
- Heavy at 29 kg
Full specifications
| Build volume | 320 × 320 × 300 mm |
|---|---|
| Motion system | CoreXY |
| Max print speed | 600 mm/s (claimed) |
| Max nozzle temperature | 370 °C |
| Max bed temperature | 120 °C |
| Enclosure | Enclosed, actively heated chamber |
| Extruder | Direct drive with harden |
| Bed leveling | Automatic |
| Multi-color / multi-material | Optional — QIDI Box, 4 spools each, up to 16 colors |
| Camera | Built-in |
| Connectivity | Wi-Fi, Ethernet, USB |
| LAN & privacy | Local-first Klipper with the Fluidd web interface; QIDI Studio and OrcaSlicer send prints by IP address. The QIDI Link app and cloud are optional. |
| Firmware | Open source |
| Filament compatibility | PLA, PETG, TPU, ABS, ASA, PA, PC, CF/GF composites |
| Release year | 2026 |
| Availability | In production |
| Company | QIDI — Zhejiang province, China |
Specs and price last verified November 2026.
Similar printers
AnycubicKobra S1 Max
$699 · 81
CrealityK2 Pro Combo
$799 · 87
FLSunS1 Pro
$799 · 84
Bambu LabX2D
$649 · 89